|
|
Please
follow the following steps to get your PAP2 device working:
1. Connect it to the power source and also to your Internet Router.
Connect your telephone handset to it on Line 1
2. Dial **** (four stars) and it will say "Linksys configuration
menu. Please enter option followed by the pound key or hang up to
exit". At this stage, enter 110# (110 followed by the pound key
which is the # key)
3. The device will then tell you its IP address, example: 192.168.0.1
. Write down the number it tells you. Open your Microsoft Internet
Explorer browser and enter this number in the address bar at the top
and press ENTER. You will now see the configuration of the Linksys
PAP2 device in your browser as below. Click ADMIN LOGIN (top right)
4. Now follow the pictures below and use the UserID and password received
from us, or one that you setup in your reseller panel.
|
|
 |
 |
 |
|
|
Mobile Dialler